Solar PV Fire Department Placards
Los Angeles County Fire Department (LACoFD) electrical disconnect placards designed for ESS, PV, and multi-source electrical systems. These red-on-yellow placards are used to identity all of the solar disconnects within the solar installation, with the most common configuration being three disconnects (main panel breaker, AC Disconnect and the ESS Disconnect).
Fire Department Placards — LACoFD Disconnect Identification
Fire department disconnect placards are required by the Los Angeles County Fire Department (LACoFD) on all solar and energy storage installations to identify the location and function of each electrical disconnect for emergency responders. The standard residential solar-plus-storage configuration requires three disconnect placards: main panel AC breaker, AC disconnect, and ESS disconnect.
Planset Signs fire department placards are produced in the LACoFD-specified red-on-yellow colourway in the dimensions and formats defined in the LACoFD Guide for ESS, PV, and Disconnects (Rev 3, 2023). Made on Rowmark UltraGrave acrylic with engineer-grade outdoor adhesive, same-day shipping from stock.
If your AHJ follows a different fire department standard — LAFD, OFD, or another municipal department — contact us with the specification. We are familiar with fire department requirements across California and can produce matching placards to order.
Solar PV Fire Department Placards Showing 27 of 27 products
PLACARD
PLACARD
PLACARD
PLACARD
PLACARD
PLACARD
PLACARD
PLACARD
PLACARD
PLACARD
PLACARD
PLACARD
PLACARD
PLACARD
PLACARD
PLACARD
PLACARD
PLACARD
PLACARD
PLACARD
PLACARD
PLACARD
PLACARD
PLACARD
PLACARD
PLACARD
PLACARD
About Solar PV Placards
Solar PV placards identify the presence and location of the solar system to utility workers, inspectors, and first responders. Unlike adhesive labels, placards are typically mounted to equipment enclosures or exterior walls and must withstand outdoor exposure for the life of the system.
All Planset Signs placards are made with Rowmark UltraGrave acrylic — 8-year UV-stable material with engineer-grade outdoor backing adhesive. All materials and production are USA-based.
What You'll Need for a Typical Install
- Solar PV system placard at utility meter
- Backfeed breaker placard at main panel
- AC disconnect placard at all disconnecting means
- Site map placard if required by AHJ
- Fire department access placard for rooftop systems
- LADWP co-gen placard if in LADWP service territory
- Single-line diagram placard if AHJ requires it
Custom Placards & Turnaround
Custom placards are produced from your uploaded artwork or specification. Submit your planset, interconnection agreement, or AHJ-specific requirements and we'll produce print-ready artwork for your approval before production.
Standard custom turnaround is 2–3 business days after artwork approval. Rush production (next day) is available for an additional fee.