Solar PV Breaker Labels
Selection of solar breaker labels designed for use inside the main service panel and load center. Made with engineer grade vinyl, laminates and adhesive, for long-term usage. Part of Planset Signs Solar PV Labels range.
- Competitive pricing and bulk discounts
- Hi Tack 6 year outdoor vinyl and UV inks
- All labels are shipped the same day, with delivery within 24-48 hours
- Wholesale accounts available to solar contractors
Solar PV Breaker Labels — Main Panel & Load Center
Solar PV breaker labels are required inside the main service panel and load center at every AC breaker position connected to the solar system — including the solar backfeed breaker, sub-panel feed-through breakers, and any dedicated ESS breakers. Labels must be permanent, legible, and weather-resistant per NEC 690.53 and 690.54.
The Planset Signs breaker label range includes labels for both micro inverter and DC string systems. Labels are printed on Hi-Tack engineer-grade vinyl for reliable adhesion to panel cover plates and bus bar surrounds.
Breaker labels are typically ordered alongside a full install label pack. Volume discounts apply automatically, and wholesale accounts include net-30 terms and access to our custom label service for project-specific configurations.
Solar PV Breaker Labels Showing 9 of 9 products
✕ Clear filters
About Solar PV Labels
NEC Article 690 requires permanent, legible, weather-resistant labels and markings throughout every solar PV installation. Labels must identify disconnecting means, source circuits, output circuit conductors, the interactive system point of connection, and rapid-shutdown initiation points.
Planset Signs manufactures the full set of labels required for a compliant California solar installation — from the AC breaker in the main panel to the conduit runs on the roof. All labels are pre-cut to standard dimensions and ready to apply straight from the pack.
What You'll Need for a Typical Install
- Breaker label at main panel AC breaker (NEC 690.53)
- Sub-panel backfeed breaker label if applicable
- AC disconnect label at all disconnecting means
- Conduit labels at each end and intermediate access points
- Rapid shutdown initiation label at service entrance
- DC source circuit write-in labels at combiner/disconnect
- ESS labels if a battery storage system is included
- Unit ID labels for multi-inverter or multi-string systems
Wholesale & Volume Pricing
Solar contractors purchasing 10 or more packs qualify for automatic volume discounts — no account setup required. Orders of 50+ unlock a further tier, and 100+ qualifies for our contractor rate.
Wholesale accounts include net-30 terms, a dedicated account manager, and access to our custom label service for AHJ-specific or project-specific markings. Contact us to open an account.